A tank leaking from the body cannot be repaired, and every hour it sits leaking is more water damage to the floor, drywall, and anything stored nearby. Our first move is to stop the water and the gas or power, contain the damage, and get the failed unit out. Then we install a properly sized replacement, to code, so you have hot water back and the closet is not a future problem.
We respond around the clock across Colleyville and Tarrant County. As a licensed Texas Master Plumber shop, we do the emergency swap right, with proper venting, an expansion tank, and a drain pan where one belongs, because a rushed install that ignores code just creates the next emergency.
Call us right away when
- The tank is leaking or has burst and water is spreading
- Water is pooling under the heater or flooding the closet or garage
- The heater failed completely and the house has no hot water
- You see rust-colored water and the tank is old, hinting at imminent failure
- The tank is bulging, corroded through, or making violent noises
- A failed heater is threatening nearby stored belongings or finished space
Why a failed tank is a time problem
A water heater holds 40, 50, or more gallons, and when the tank ruptures that water keeps coming as long as the supply is on, because the tank refills as it drains. That is how a failed heater floods a garage. The damage to flooring, drywall, and stored items adds up fast, which is why stopping the water immediately matters as much as replacing the unit.
The tank body itself cannot be repaired once it fails, so this is a replacement, not a fix. If your heater is merely acting up rather than flooding, our standard water heater repair and installation service covers the repair-versus-replace decision. And if the failure caused significant flooding, we can start water damage cleanup so the mold clock does not run out on you.
Shut it down before we arrive
Close the cold-water supply valve on top of the heater to stop the flooding. On a gas unit, turn the gas control knob to off, and on an electric unit, switch off its breaker. Then move stored items out of the water. Our post on what to do when your water heater fails overnight walks through it.
How the emergency swap works
Stop, drain, and remove
We confirm the water and fuel are off, drain the failed tank, and haul it out. Getting the leaking unit disconnected stops the source and lets us assess the space.
Install the right replacement
We install a properly sized unit for your household, with correct venting on gas models, a thermal expansion tank to protect against pressure spikes, and a drain pan and shutoff where they belong. Doing it to code in an emergency is not optional, it is what keeps this from happening again.
Test and clean up
We bring the new unit up to temperature, check for leaks, confirm everything drafts and drains correctly, and haul away the old tank. You get hot water back and a closet that is not a liability.
Would tankless make sense instead?
An emergency is not the ideal time for a big system change, but if your failed tank has you rethinking things, we can talk about whether a tankless system fits once the emergency is stabilized. For now, the priority is getting hot water back and the flooding stopped.
What Affects the Price
We quote every job after we see it — the figures below explain what moves the price up or down. You’ll always get a written scope before work starts.
For reference, a typical DFW plumber visit runs $177–$469 (about $321 on average), and our diagnostic fee falls in the common $75–$165 range and is credited toward approved work. Emergency and after-hours calls may cost 1.5–2× standard rates.
- The size and fuel type of the replacement unit
- After-hours or emergency timing, which runs above standard rates
- Code upgrades the install requires, like an expansion tank, venting, or a drain pan
- Access to the unit, whether in a garage, closet, or tight attic
- Haul-away of the failed tank and any water cleanup needed
- Permits where the City of Colleyville requires them
Ready to fix it right?
Licensed Colleyville plumbers, upfront pricing, same-day slots.
How We Handle Your Emergency Heater
Diagnosis first, then a written scope — no guessing, and no pressure to replace what can be repaired.
- 1Triage & safe shut-offWe review symptoms and gas safety and guide you to the main valve if needed.
- 2Inspect & testCamera inspection, pressure testing, or leak detection pinpoints the real cause.
- 3Explain the evidenceYou see what we found and the repair options before anything is approved.
- 4Written scope & upfront priceLabor, materials, permits, and cleanup itemized — permits pulled when required.
- 5Repair, clean & verifyWe complete approved work, test it, tidy up, and hand you photos and warranty terms.
Why Colleyville Homeowners Choose Us for Emergency Heater
You have plenty of plumbers to call. Here’s why neighbors keep our number on the fridge — and why our emergency water heater replacement work holds up.
Emergency Water Heater Replacement FAQs
In most cases, yes. We stock the common tank sizes for Colleyville homes, so when a heater ruptures or dies we can often remove the old unit and install a new one the same day. We confirm the sizing, venting, and any code upgrades up front so there are no surprises on the invoice.