Argyle is where Denton County keeps its elbow room. The town sits along US-377 with big custom homes on multi-acre lots, a lot of them with a barn, a shop building, or a guest house somewhere out back. That rural-luxury mix makes the plumbing here different from a tract-home suburb — we are often working with well water, septic systems, and gas lines that run a hundred feet or more from the meter to an outbuilding. The newer master-planned side of town, like the Harvest community, adds modern subdivisions to the mix, but the acreage character still dominates.
The drive up from Colleyville runs TX-114 west to I-35W and then north, exiting toward US-377 and FM 407 — roughly 30 minutes to the heart of Argyle, a bit more out to the properties near Denton Creek. Distance out to a rural property is exactly why we come stocked to handle the whole job in one trip; nobody wants a plumber who has to leave for parts and drive back across the county. For genuine emergencies, our 24/7 emergency plumbing crew covers the acreage the same as the neighborhoods.
Local Plumbing in Argyle
A big share of Argyle plumbing is about the extras — the second and third structures on a property. A shop with a bathroom and a wash sink, a barn with hydrants for livestock, an outdoor kitchen by the pool. Each of those needs its own supply, drain, and often its own gas run. We do a lot of gas line installation here, sizing and running lines out to detached shops and generators, and pressure-testing every foot because a leak on a buried run to an outbuilding is not something you want to discover the hard way.
The other defining Argyle project is septic-to-sewer conversion. As municipal service has extended into parts of town, homeowners on aging septic systems have the option — and sometimes the requirement — to tie into the public sewer line. That is a substantial job: abandoning the old tank properly, running a new lateral out to the main, and getting the slope right over a long distance. We handle the whole conversion, permits included.
Well-water homes bring their own list. Pressure tanks, well pumps, and the hard, mineral-heavy water that comes with them all need attention, and that water eats water heaters and fixtures faster than city water does. A good water filtration and softener system is close to mandatory on a well out here if you want your appliances to last.
Why Argyle Homeowners Call Us
We cover Argyle from the older acreage along US-377 and FM 407 out to the newer rooftops in Harvest, and we are comfortable on the long rural driveways that make some plumbers nervous about the trip. We have run gas to shop buildings near Denton Creek and repiped guest houses that had sat winterized and forgotten for a couple of seasons.
One job that stands out: a homeowner on several acres called because his main-house water pressure kept dropping to a trickle, but only sometimes. The culprit was a hairline crack in the buried line feeding his detached shop — every time the shop's irrigation zone kicked on, it drew down the whole property's pressure and bled water into the ground by the fence line. He had been blaming his well pump for months. We located and replaced the cracked section and added an isolation valve so the shop could be shut off independently. His pressure came back and his well pump stopped short-cycling toward an early death.
Argyle's soil out on the acreage tends toward the same expansive clay as the rest of the region, but the bigger seasonal issue for these properties is freeze protection on all that exposed plumbing — hose bibs, well-house lines, and the supply to detached structures. After the 2021 freeze took out well houses and shop bathrooms all over the county, we insulate and add shutoffs so a hard winter does not become a burst pipe repair emergency.
Plumbing Services We Offer in Argyle
See our full list of plumbing services →
Honest Pricing for Argyle Homeowners
Most companies won’t talk price until they’re at your door. We’ll give you the context up front. A typical Dallas–Fort Worth plumber visit runs $177–$469 (about $321 on average), and our diagnostic fee falls in the common $75–$165 range and is credited toward approved work. Bigger jobs — a water heater, a slab leak, or a repipe — carry published DFW benchmark ranges we’re happy to walk through. Every Argyle job gets a written price before major work begins. See the full service list for details, and remember these are benchmarks, not quotes.
How We Work in Argyle
Diagnosis first, then a written scope — no guessing, and no pressure to replace what can be repaired.
- 1Triage & safe shut-offWe review symptoms and gas safety and guide you to the main valve if needed.
- 2Inspect & testCamera inspection, pressure testing, or leak detection pinpoints the real cause.
- 3Explain the evidenceYou see what we found and the repair options before anything is approved.
- 4Written scope & upfront priceLabor, materials, permits, and cleanup itemized — permits pulled when required.
- 5Repair, clean & verifyWe complete approved work, test it, tidy up, and hand you photos and warranty terms.
Argyle Plumbing FAQs
Yes. As sewer service reaches more of the US-377 and Harvest areas, we handle septic-to-sewer conversions including the new lateral, connection, and proper abandonment of the old tank. We pull the permits and coordinate the inspection so it is done to code.